2026
・K. Hara, Y.Hori and S. Konishi, "A Temperature-compensated Liquid-metal Flexible Strain Sensor Integrated into a Microfinger for Tactile Sensing under Temperature Variations", Asia-Pacific Conference of Transducers and Micro-Nano Technology 2026 (APCOT-2026)

・S.Bono, K.Arai and S.Konishi, Automated System for Dispensing Solutes into Droplets with Common Concentration Difference" Asia-Pacific Conference of Transducers and Micro-Nano Technology 2026 (APCOT-2026)

・T.Nakatsuka, H.Hirata, M.Nagai and S.Konishi, Soft Microfinger Robot for Bilateral Head Stimulation and Reaction-Force Analysis in Zebrafish Larvae" Asia-Pacific Conference of Transducers and Micro-Nano Technology 2026 (APCOT-2026)

2025
・S.Konishi, "Smart micro-fingers for tactile microscope and their applications" 36th 2025 International Symposium on Micro-Nano Mehatronics and Human Science (MHS2025), Nagoya JAPAN(2025.11)

・T. Nakatsuka and S. Konishi, "LIQUID METAL FLEXIBLE 3-AXIS FORCE SENSOR ON A DEFORMABLE PNEUMATIC BALLOON FOR SENSOR ATTITUDE CONTROL", THE 23ND INTERNATIONAL CONFERENCE ON SOLID-STATE, SENSORS, ACTUATORS AND MICROSYSTEMS (TRANSDUCERS 2025)

・Y.Miyata, S.Bono and S.Konishi, "HOMOGENIZATION OF SOLUTE CONCENTRATION IN VERTICALLY COALESCENT DROPLETS USING ACOUSTIC WAVE", THE 23ND INTERNATIONAL CONFERENCE ON SOLID-STATE, SENSORS, ACTUATORS AND MICROSYSTEMS (TRANSDUCERS 2025)

・Y. Hori and S.Konishi, "ELASTICITY-INDEPENDENT ANGLE DETECTION FOR DIRECTIONAL PALPATION USING A MICROFINGER BY INTEGRATED DESIGN OF FLEXIBLE STRAIN SENSORS", THE 23ND INTERNATIONAL CONFERENCE ON SOLID-STATE, SENSORS, ACTUATORS AND MICROSYSTEMS (TRANSDUCERS 2025)

2024
・Y. Hori and S. Konishi, "Searching for Stiffness Singularity Using Directional Palpation by a Microfinger and Its Scanning Condition Dependence" Asia-Pacific Conference of Transducers and Micro-Nano Technology 2024 (APCOT-2024)

・Y.Miyata, S.Bono and S.Konishi, "Mixing of Multiple Solutions by Selective Dispensing Using Volume Control in Droplet-Array
Sandwiching Technology" Asia-Pacific Conference of Transducers and Micro-Nano Technology 2024 (APCOT-2024)

・S.Bono,"Visualization of electric and thermal properties of micromachines using liquid crystal droplets"10th Japanese-Italian Joint Workshop on Liquid Crystal

2023
2022
2019
・H.Kosawa, S. konishi, "REINFORCEMENT DESIGN FOR NEWTON-LEVEL HIGH FORCE GENERATED BY BENDING MOTION OF SOFT MICROACTUATOR", The 20th International Conference on Solid-State Sensors, Actiators and Microsystems (Transducers 2019), pp.2531-2534, Berlin, Germany (2019)

・S. Otake, F. Mori and S. Konishi "COMMON FLEXIBLE CHANNEL STRUCTURE FOR INTEGRATION OF THREE-AXIS FORCE SENSOR AND SOFT MICRO ACTUATOR", Micro Electro Mechanical Systems (MEMS), pp. 652-655, Seoul, Korea (2019.1)
2018
・H. Kosawa and S. Konishi "Wearable Hand Motion Capture Device", IEEE CPMT Symposium, pp.129-130, Kyoto, Japan (2018.11)

・F. Oya and S. Konishi "Local Contyol of the Cross-Sectional Shape of the Artificial Biomimetic Tube by Pneumatic Balloon Actuator", Asia - Pacific Conference of Transducers and Micro - Nano Technology (APCOT), Hong-Kong (2018.6).

・S. Otake and S. Konishi: “INTEGRATION OF FLEXIBLE STRAIN SENSOR USING LIQUID METAL INTO SOFT MICRO-ACTUATOR”, Micro Electro Mechanical Systems (MEMS), pp. 571-574, Belfast (2018.1)

・C. Ohya and S. Konishi: “DROPLET HEIGHT CONTROL BY ELECTROWETTING-ON-DIELECTRIC FOR SELECTIVE CONTACT FUSION OF DRPLETS ON RFACING SUBSTRATES”, Micro Electro Mechanical Systems (MEMS), pp. 1201-1204, Belfast (2018.1)


2017

・R. Kawashima, S. Hagimori, A. Sato and S. Konishi: “SLAVE FLEXIBLE MICRO-FINGER INTEGRATED WITH SENSOR FOR MASTER-SLAVE SENSE PRESENTATION SYSTEM”, The 19th International conference on Solid-State Sensors, Actuators and Microsystems (Transducers), pp. 55-58, Kaohsiung, Taiwan, (2017.6)

・H. Maeda, C. Ohya, T. Matsuyoshi, T. Kobayashi and S. Konishi: “CONTACT FUSION OF DROPLETS PATTERNED ON OPPOSING PLATES FOR CELLULAR TRANSPORTATION AND MEDIUM EXCHANGE FOR HANGING DROPLET CELL CULTURE”, The 19th International conference on Solid-State Sensors, Actuators and Microsystems (Transducers), pp.115-118, Kaohsiung, Taiwan, (2017.6)

・ T. Kobayashi and S. Konishi,” OPTICALLY-DRIVEN GAS GENERATOR BY PHOTOVOLTAIC ASSISTED PHOTOELECTROLYSIS USING SE/TiO2 HETEROJUNCTION STRUCTURE”, The 19th International Conference on Solid-State Sensors, Actuators and Microsystems(Transducers), pp.359-362, Kaohsiung, Taiwan,(2017.6)

・T. Ezaki, S. Otake, and S. Konishi: “SOFT MICRO-FINGERS INTEGRATED WITH FIBERSCOPE FOR BOTH MANIPULATION AND IN-SITU OBSERVATION OF BIO-PARTICLE”, The 19th International conference on Solid-State Sensors, Actuators and Microsystems (Transducers), pp.552-555, Kaohsiung, Taiwan, (2017.6)

・K. Nakagawa, K. Tsuda, K. Hattori, S. Ato, K. Kido, S. Fujita, and S. Konishi: “RT-PCR MICROMODULE BASED ON OLIGO(DT) MICROCOLUMN FOR MICRO TOTAL GENE EXPRESSION ANALYSIS SYSTEM”, The 19th International conference on Solid-State Sensors, Actuators and Microsystems (Transducers), pp.730-733, Kaohsiung, Taiwan, (2017.6)

・T. Matsuyoshi, T. Fujita, and S. Konishi: “TRANSPARENT CELL-CAPTURING CHIP LAMINATED BY FILM PHOTORESIST WITH SUCTION HOLES AND CHANNELS AND ITS APPLICATION TO TRANSEPITHELIAL ELECTRIC RESISTANCE MEASUREMENT”, The 19th International conference on Solid-State Sensors, Actuators and Microsystems (Transducers), pp.1676-1679, Kaohsiung, Taiwan, (2017.6)

2016

・H. Maeda, T. Kobayashi, S. Konishi: “Sputter-coated Rutile-TiO2 on Topological Micro-structure for Providing High Photoresponsivity”, Micro Electro Mechanical Systems (MEMS), pp. 725-728, Shanghai, CHINA (2016.1)

・K. Tsuda, K. Hattori, H. Wada, Y. Makanae, S. Fujita, S. Konishi: “Micro Total mRNA Extraction System From Biopsied Skeletal Muscle Tissure”, Micro Electro Mechanical Systems (MEMS), pp. 772-775, Shanghai, CHINA (2016.1)

・S. Sugama, K. Hattori, and S. Konishi: “Flexible Geometric Design for Openable Biomimetic Tube Providing Variable Flow Conditions for Cell-based Assay”, Asia - Pacific Conference of Transducers and Micro - Nano Technology (APCOT), Kanazawa, Japan (2016.6).

・R. Kanamaru, T. Tanaka, and S. Konishi: “An Array of Micro Chambers Trapping a Single Cell for Analysis of Moving Cells”, Asia - Pacific Conference of Transducers and Micro - Nano Technology (APCOT), Kanazawa, Japan (2016.6).

・Y. Tsujimura, and S. Konishi: “Micro Diaphragm Valve Driven by a Thermally Responsive Solution for Compact Pressure Control System”,Asia - Pacific Conference of Transducers and Micro - Nano Technology (APCOT), Kanazawa, Japan (2016.6).

・T. Kobayashi, and S. Konishi: “Sputter-deposited TiO2 Thin Films with Immobilized Lactate Dehydrogenase for Potentiometric Lactate Sensing”,Asia - Pacific Conference of Transducers and Micro - Nano Technology (APCOT), Kanazawa, Japan (2016.6).

・H. Maeda, T. Kobayashi, and S. Konishi: “Patterning of Wettability Using the Photocatalytic Decomposition of Hydrophobic SAM on the TiO2 Pattern” , Microprocesses and Nanotechnology Conference (MNC), 11P-11-88, Kyoto, Japan (2016. 11).

・T. Kobayashi, H. Maeda, and S. Konishi: “Photoresponsive wettability switching on TiO2-coated micro pillar array with different geometric overhang roofs”, Micro-Nano Science and Technology (MNST), SaA1-A-7, Tokyo, Japan (2016. 12).


2015

・T. Kobayashi, H. Maeda and S. Konishi:  “Surface fluorination of sputter-deposited TiO2 thin films for accelerating response of optically-driven capillary pump”, Microprocesses and Nanotechnology Conference(MNC), Toyama, Japan, (2015. 11).

・S. Hidaka, M.E.J. Obien, U. Frey, and S. Konishi:“WIRE-BONDING-BASED VERTICAL MICROPROBE ELECTRODE ARRAYS INTEGRATED ONTO HIGH-DENSITY MICROELECTRODE ARRAYS WITH ACTIVE CIRCUITRY FOR EXTRACELLULAR RECORDING”, Transducers，pp2232-2235, Alaska, USA (2015.6.)

・S. Honda, Y. Tsujimura, and S. Konishi:“DESIGN AND CHARACTERIZATION OF CONTRACTION MOTION ACTUATOR CONVERTED FROM SWELLING PNEUMATIC BALLOON ACTUATOR FOR LARGE DEFORMATION AND FORCE”, Transducers，pp2140-2143, Alaska, USA (2015.6.)

・H. Ohtake and S. Konishi:“FABRICATION AND CHARACTERIZATION OF ARRAY OF OPTICAL FIBERS INTEGRATED WITH CONCAVE LENS FOR SPATIAL FLUORESCENT OBSERVATION”, Transducers，pp192-195, Alaska, USA (2015.6)

・Y. Muramatsu, T. Kobayashi, S. Konishi: “FLEXIBLE END-EFFECTOR INTEGRATED WITH SCANNING ACTUATOR AND OPTICAL WAVEGUIDE FOR ENDOSCOPIC FLUORESCENCE IMAGING DIAGNOSIS”,Micro Electro Mechanical Systems (MEMS), pp.166-167, Estoril, PORTUGAL(2015.1)


2014

・N. Igata, K. Ishi and S. Konishi: “LIQUID PLUG FOR ENCAPSULATION AND INTERCONNECTION OF IONIC LIQUID AS VARIABLE RESISTANCE FOR MICRO POTENTIOMETER”, Asia - Pacific Conference of Transducers and Micro - Nano Technology (APCOT), Perth, Daegu, Korea (2014.6)

・S. Honda, T. Chishiro, B. Stoeber, and S. Konishi: “INTEGRATION OF MICROVALVE USING THERMALLY RESPONSIVE SOLUTION INTO SUPPLY CHANNEL FOR PNEUMATICALLY DRIVING ACTUATOR”, Asia - Pacific Conference of Transducers and Micro - Nano Technology (APCOT), Perth, Daegu, Korea (2014.6)

・T. Chishiro, S. Honda and S. Konishi:“COMPOSITE OF THERMALLY RESPONSIVE SOLUTION AND LUBRICATING MICRO BEADS AS SEALING MATERIAL FOR PISTON-CYLINDER ACTUATOR”, Micro Electro Mechanical Systems (MEMS), pp.592-595, San Francisco, USA (2014.1)

・S. Shimomura, Y. Teramachi, Y. Muramatsu, S. Tajima, Y. Tabata and S. Konishi: “PINCHING AND RELEASING OF CELLULAR AGGREGATE BY MICROFINGERS USING PDMS PNEUMATIC BALLOON ACTUATORS”, Micro Electro Mechanical Systems (MEMS), pp.925-926, San Francisco, USA (2014.1)

2013

・T. A. Nguyen and S. Konishi:“Position Feedback Control of Electrostatically Controlled Linear Actuator System”, Micro-Nano Mehatronics and Human Science (MHS), Nagoya JAPAN (2013.11.13)

・H. Matsui, F. Hagihara, T. Wada, and S. Konishi:“COMBINATION OF MULTI LEDS LIGHT SOURCE AND LIGHT ABSORPTION CELL DESIGNED FOR COLORIMETRIC ANALYSIS OF BLOOD PLASMA”, Miniaturized Systems for Chemistry and Life Sciences(μTAS),  Freiburg GERMANY,(2013.10.30)

・H.Wada, S.Konishi: “Transplantation Tool Integrated with MEMS Manipulator for Retinal Pigment Epithelium Cell Sheet”, 35th Annual International IEEE EMBS Conference, Paper ThA07.6(2013.7.4)

・Y. Matsushita, C. Nakagami, T. Toriyama, and S. Konishi: “MATERIAL STRENGTH EXAMINATION OF THIN FILM PDMS FOR RELIABLE PNEUMATIC BALLOON ACTUATOR” ,Transducers，pp1950-1953(2013.6.)

・B. Gorissen, T. Chishiro, S. Shimomura, M. De Volder, D. Reynaerts, and S. Konishi: “FLEXIBLE PNEUMATIC TWISTING ACTUATORS”, Transducers,PP.1687-1690(2013.6.)

・C. Nakagami, W. Tonomura, Y. Kaizuma, and S. Konishi:“LOW TEMPERATURE PROCESS BELOW 170°C FOR HYDROPHILIC AND HYDROPHOBIC MICRO PATTERNS” ,Transducers, PP.1111-1114(2013.6.)

・Y. Teramachi, S. Shimomura, W. Tonomura, S. Tajima,  Y. Tabata, and S. Konishi:“CELLUAR AGGREGATE CATCHER USING FLUIDIC MANIPULATION IN HIGH COMPATIBILITY WITH WIDESPREAD MICRO-WELL-PLATE”, Transducers,PP.2209-2212(2013.6.18)

・T. Chishiro and S. Konishi,:“MULTIARTICULAR MANIPULATOR AND ITS MUKTI DEGREE OF FREEDOM MOTION BY DISTRIBUTED THIN PISTON-CYLINDER ACTUATORS”, Transducers,PP.1579-1582(2013.6.18)

・S. Katano, Y. Teramachi, W. Tonomura, S. Konishi:“HETERO MULTILAYER MICRO STRUCTURES BY RAPID PROTOTYPING FORSIMULTANEOUS ENCAPSULATION AND INTERCONNECTION OF MICROCHIPS” Micro Electro Mechanical Systems (MEMS), pp.373-376, Taipei, TAIWAN (2013.1)

・T.Chishiro , T. Ono, S. Konishi:“PANTOGAPH MECHANISM FOR CONVERSION FROM SWELLING INTO CONTRACTION MOTION OF PNEUMATIC BALLOON ACTUATOR” Micro Electro Mechanical Systems (MEMS), pp.532-535, Taipei, TAIWAN (2013.1)

・W.Tonomura, Y. Mori, S. Konishi: “HIGH-SENSITIVITY ELECTROCHEMICAL SENSOR USING PYROLYZED POLYMER-GOLD 3D PROBE ARRAYS FOR SPATIAL CHEMICAL SENSING”, Micro Electro Mechanical Systems (MEMS), pp.1011-1014, Taipei, TAIWAN (2013.1)


2012

・ K. Shimizu, H. Araki, K. Sakata, W. Tonomura, M. Hashida, S. Konishi, “Microfluidic Devices for Culturing Contractile Skeletal Muscle Microtissues” Symposium on New Technology for Cell-based Drug Assay, Tokyo JAPAN(2012.12)

・K.Shimizu, Y. Mori, K. Hayashi, A. Shunori, S. Kawakami, M. Hashida, S. Konishi: “Gene delivery in mice using an implanted pneumatically-actuated microsystem”, Micro Electro Mechanical Systems (MEMS2011), pp181-184, Cancun, Mexico, Jan (2011),

・K. Morimoto, Y. Tada, H. Takashima, K. Minamino, R. Tahara and S. Konishi: “5-Iinch-Size Contactless Gripper Using Arrayed Spiral Air Flows”, Micro Electro Mechanical Systems (MEMS), pp. 1063-1066, Cancun, Mexico (2011.1)

・K. Shimizu, Y. Higuchi, Y. Kozu, M. Hashida, and S. Konishi: “A SIMPLE PDMS-BASED SUCTION DEVICE FOR STABILIZING IN VIVO REAL-TIME FLUORESCENCE IMAGING OF TRANSPLANTED CELLS IN LIVE ANIMALS”, Miniaturized Systems for Chemistry and Life Sciences (μTAS),W37A pp 1551-1553, Washington State Convention Center, Seattle Washington (2011.10.5)

・H. KOGA, Y. SAKATA, S. HIROSE and S.KONISHI: “CAPSULE MICROROBOT FOR TARGETTING IN MEDICAL DIAGNOSTIC TREATMENT”, Transducers, pp 2835-2838, Beijing, China, (2011.6.8)

・K. Morimoto, A. Utsumi and S. Konishi: “A DESIGN OF LONGITUDINALLY-DIVIDED BALLOON STRUCTURE IN PDMS PNEUMATIC BALLOON ACTUATOR BASED ON FEM SIMULATIONS”, Th1A.002, Transducers, pp 2774-2777, Beijing, China, (2011.6.8)

・A. Akazawa, Y. Furuno, H. Saiki, E. Ozeki and S. Konishi: “HIGH PERFORMANCE 18F- CONCENTRATION ELECTRODE FOR PET APPLICATION BY USING INTERDIGITATED MICROSTRUCTURE AND PYROLYZED POLYMER/GLASSY CARBON COMPOSITE”, Transducers, pp 2327-2330, Beijing, China, (2011.6.8)

・T. Kobayashi, A. Akazawa, Y. Furuno, W. Tonomura and S. Konishi: “TRANSFER TECHNOLOGY OF PYROLYZED POLYMER ONTO LOW THERMAL TOLERANCESUBSTRATE”, Transducers, pp 1348-1381,Beijing, China, (2011.6.7)

・A. Shunori, K. Shimizu, M. Hashida, and S. Konishi: “MECHANICAL STIMULATOR OF CULTURED VASCULAR ENDOTHELIAL CELL FOR INVESTIGATION OF DRUG PERMEABILITY OF BLOOD VESSEL”, Transducers, pp 763-766, Beijing, China, (2011.6.6)

・J. Kunishida, W. Tonomura, J. Sato and S. Konishi: “PARALLEL FOCUSING AND SWITCHING OF LEAKAGE FLUX FROM MAGNETIC LOOP FOR ON-CHIP PATTERNING OF MAGNETICALLY LABELED CELLS”, Transducers, pp 194-197, Beijing, China, (2011.6.6)

・W. Tonomura, S. Taga, C. Koike, S. Konishi:“Multi-site electroretinogram recordings inside isolated mouse retina using flexible spatially arranged microelectorde probes”, Transducers, pp. 1188-1191, Beijing, China, June 5-9, 2011.


2010

・K. Morimoto, Y. Tada, H. Takashima, K. Minamino, R. Tahara and S. Konishi, "Design and Characterization of High-Performance Contactless Gripper Using Spiral Air Flows," Proc. 2010 Int. Symp. on Micro-Nano Mechatronics and Human Science, pp. 423-428, Nagoya, (2010.11)

・K. Morimoto, D. Kato and S. Konishi, "Numerical Estimation of Plasma Layer Thickness in Branched Microchannel Using a Multi-Layer Model of Blood Flow," 14th Int. Conf. on Miniaturized Systems for Chemistry and Life Sciences(μTAS2010）, pp.265-267,Groningen, The Netherlands, (2010.10)

・K. Morimoto, Y. Tada, H. Takashima, K. Minamino, R. Tahara and S. Konishi, "Design and Characterization of MEMS-Based Nozzle for Application to Air-Flow Type Fiber Generation Technology," 2010 Int. Symp. on Flexible Automation (ISFA), Tokyo, Japan (2010.7)

・W. Tonomura, K. Shimizu and S. Konishi, "Electrophysiological Recordings using Spatially Arranged Microelectrode Probes Embedded into 3–D Neuronal Cultures", 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences(μTAS2010）, pp.265-267,Groningen, The Netherlands, (2010.10)

・T. Kobayashi, K. Shimizu, Y. Kaizuma, S. Konishi, "Novel Combination of Hydrophilic/Hydrophobic Surface for Large Wettability Difference and It's Application to Liquid Manipulation", 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences(μTAS2010）, pp.265-267,Groningen, The Netherlands,(2010.10)

・K. Shimizu, A. Shunori, K. Morimoto, M. Hashida, and S. Konishi, "Strain-Gradation Generator using Serially Connected Microbaloons for Parallel Testing of Cell-Stretching Culture", 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences(μTAS2010）, pp.265-267,Groningen, The Netherlands,(2010.10)

・K. Shimizu, T. Yamasaki, A. Shunori, H. Takahashi, S. Kawakami, M. Hashida, and S. Konishi, "PDMS-pneumatic balloons for drug delivery to target tissues", Proc. of Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Perth, Western Australia, (2010.7)

・K. Morimoto, K. Nasu, and S. Konishi, "Numerical Simulation of Bending Motions of Pneumatic Balloon Actuators", Proc. of Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Perth, Western Australia, (2010.7)

・K. Morimoto, Y. Tada, H. Takashima, K. Minamino, R. Tahara and S. Konishi, "A MEMS-Based Contactless Gripper with Arrayed Spiral Air Flows", 2010 International Symposium on Flexible Automation (ISFA), Tokyo, Japan (2010.7)

・T. Kobayashi and S. Konishi, "Nanoliter Scale Droplet Extraction in Combination of Deformable Wall and Super Hydrophobic Pattern in Channel", The 23^rd Int. Conf. on IEEE Micro Electro Mechanical Systems (MEMS), pp.1099-1102, Hong kong, China (2010.1).

・K. Morimoto, Y. Tada, H. Takashima, K. Minamino, R. Tahara and S. Konishi, ”Micro Spinning Nozzle having 3D Profile for Fiber Generation with Spiral Air Flow”, The 23^rd Int. Conf. on IEEE Micro Electro Mechanical Systems (MEMS), pp.244–247, Hong kong, China (2010.1).

・M. Ito, T. Kuwamura, and S. Konishi, ”Low Physical Restriction MEMS Potentiometer Using Probe Dipping μpool with Conductive Liquid”, The 23^rd Int. Conf. on IEEE Micro Electro Mechanical Systems (MEMS), pp.288–291, Hong kong, China (2010.1).

・M. Tokida, T. Obara, M. Takahashi, M. Yamato, and S. Konishi, ”Integration of Cell Sheet Suking and Tactile Sensing Functions to Retinal Pigment Epithelium Transplantation Tool”, The 23^rd Int. Conf. on IEEE Micro Electro Mechanical Systems (MEMS), pp.316–319, Hong kong, China (2010.1)

2009

・T. Funamoto, M. Hosaka, T, Kobayashi and S. Konishi: “Centrifugal Separation Device Using Two-Layer Laminar Flow in Micro Channels for High-Throughput and Continuous Cell/Plasma Separation”, Miniaturized Systems for Chemistry and Life Sciences(μTAS), pp812-814, Jeju, Korea(2009.11).

・S. Sawano, N. Fujiwara, Y. Kurumi , T. Tani, and S. Konishi: “Outer Shell Actuator Driving Central Bending Shaft by Balloon Arrays Circumferentially-Arranged Inside of Shell”,Transducers, pp53-56, Denver, CO, USA(2009.6).

・K. Okamoto, A. Syunori, R. Iwata, H. Saiki, H. Nakanishi and S. Konishi: “Pyrolyzed Polymer and its Composite for 18F- Concentration Electrode Toward Pet Application”, Transducers, pp1904-1907, Denver, CO, USA(2009.6).

・T. Kobayashi, H. Koga, and S. Konishi: “Photonic Patterns and Micro Knife Array on Individual Faces of Transparent Bifacial Chip For in Situ Nir Observation and Biopsy”, Transducers, pp1979-1982, Denver, CO, USA (2009.6).

・T. Kobayashi, D. Kato, H. Koga, K. Morimoto, M. Fukuda, Y. Kinoshita, H. Yoshida and S. Konishi:“Adaptive Blood Cell Separation using Cooperation of Serially Connected Membrane Filters”, Micro Electro Mechanical Systems (MEMS), pp.260–263, Sorrento, Italy (2009.1).

・W. Tonomura, K. Shimizu and S. Konishi: “Spatially Arranged Microelectrodes using Wire Bonding Technology for Spatially Distributed Chemical Information Acquision”, Micro Electro Mechanical Systems (MEMS), pp.741–744, Sorrento, Italy (2009.1)

・N. Fujiwara, S. Sawano and S. Konishi: “Linear Expansion and Contraction of Paired Pneumatic Baloon Bending Actuators toward Telescopic Motion”, Micro Electro Mechanical Systems (MEMS), pp.435–438, Sorrento, Italy (2009.1).

・D. Wakui, N. Imai, Y. Nagaura, H. Sato, T. Sekiguchi, S. Konishi, S. Shoji and T. Homma: “EHD Micro Pump using Pyrolyzed Polymer 3–D Carbon Mesh Electrodes”, Micro Electro Mechanical Systems (MEMS), pp.499–502, Sorrento, Italy (2009.1).


2008

・W. Tonomura and S. Konishi: “Biochemical On–Vision Chip Composed of Imaging Chip and Direct Mounted Transparent Micro–TAS”, The 3rd Int. Workshop on Approaches to Single–Cell Analysis (SCAW), Zurich, Switzerland (2008.9).

・S. Konishi and W. Tonomura: “On–Chip Cellular Manipulation for Cellular Analysis”, The 3rd Int. Workshop on Approaches to Single–Cell Analysis (SCAW), Zurich, Switzerland (2008.9).

・W. Tonomura, H. Moriguchi, Y. Jimbo and S. Konishi: “Parallel Multipoint Recording of Aligned and Cultured Neurons on Corresponding Micro Channel Array toward On–Chip Cell Analysis”, Engineering in Medicine and Biology Society (EMBS), pp.943–946, Vancouver, Canada (2008.8)

・W. Tonomura and S. Konishi: ”Lab on a Vision Chip Composed of CCD Imaging Chip and Direct Mounted Transparent Micro-TAS”, Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Tainan, Taiwan (2008.6)

・K. Shimizu, M. Nakanishi, M. Makikawa, S. Asajima and S. Konishi: “Combination of Wire Bonding and Laser Machining for Flexible Probes as Low Damage Electrical Interface”, Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Tainan, Taiwan (2008.6).

・T. Maeda and S. Konishi: “Electrostatic Oscillator for Electrostatically Controled Linear Actuator”, Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), Tainan, Taiwan (2008.6).

・T. Morimoto and S. Konishi: “Addressable Fluidic Gate Arrays for Layer-to-Layor Parallel Fluidic Transportation System”, Micro Electro Mechanical Systems (MEMS), pp. 543-546, Tucson, Arizona, USA (2008.1).

・S. Sawano, K. Naka, A. Werber, H. Zappe and S. Konishi:“Sealing Method of PDMS as Elastic Material for MEMS”, Micro Electro Mechanical Systems (MEMS), pp. 419-422, Tucson, Arizona, USA, (2008.1).

・T. Hiranishi, W. Tonomura, K. Ino, M. Okochi, H. Honda and S. Konishi:“Both Pneumatic and Magnetic Induction of Scattered Cells on Micro Channel Array for Cellular Analysis”, Micro Electro Mechanical Systems (MEMS), pp. 284-287, Tucson, Arizona, USA, (2008.1)


2007

・W. Tonomura, M. Sato, H. Okamura and S. Konishi: “Transparent Biosensor with Micro Channel Array for Optical and Electrophysiological Cell Signal Detection” International Symposium on Micro-Nano Mechatronics and Human Science (MHS), pp. 292-297, Nagoya, Japan, (2007.11)

・O. C. Jeong and S. Konishi: “Peristaltic Micro Pump Actuated by Single Input Signal”, Proc. of the 11th International Conference on Miniaturized Systems for Chemistry and Life Sciences (μTAS), pp. 557-559, Paris, France, (2007.10)

・W. Tonomura and S. Konishi: “Simultaneous Multipoint Measurement of Cellular Network by Isolated Micro Channel Array with Pt–Black Electrodes”, The 2nd International Workshop on Approaches to Single–Cell Analysis, p.49, Tokyo, Japan, (2007.9)

・W. Tonomura, T. Kurashima, Y. Takayama, H. Moriguchi, Y. Jimbo and S. Konishi: “Simultaneous Multipoint Measurement of Cellular Network by Isolated Micro Channel Array with Pt-Black Electrode”, Actuators and Microsystems (Transducers), pp. 1793-1796, Lyon, France, (2007.6)

・T. Miyano, T. Miyachi, T. Okanishi, H. Todo, K. Sugibayashi, T. Uemura, N. Takano and S. Konishi: “Hydrolytic Microneedles as Transdermal Drug Delivery System” Actuators and Microsystems (Transducers), pp. 355-358, Lyon, France, (2007.6)

・T. Saika, R. Yokokawa, H. Fijita and S. Konishi: “Direct Liquid Manipulation by Parallel Micro Syringe System for High Controllability with Pico-Liter Scale”, Actuators and Microsystems (Transducers), pp. 1877-1880, Lyon, France, (2007.6)

・K. Iso, T.K. Saito, H. Muguruma, H. Tabata and S. Konishi: “Photodynamic Perforation of Cell Membrane on Micro Channel Array toward Intracellular Technology”,  Micro Electro Mechanical Systems (MEMS), pp. 445-448, Kobe, Japan, (2007.1)

・K. Yoshioka, K. Naka and S. Konishi: “Promotion Effect of Iodization on Carbonization for MEMS Application”, Micro Electro Mechanical Systems (MEMS), pp. 243-246, Kobe, Japan, (2007.1)

・K. Yamamoto, K. Naka, Y. Nagaura, H. Sato, S. Shoji and S. Konishi: “Pyrolyzed Polymer Mesh Electrode Integrated into Fluidic Channel for Gate Type Sensor”, Micro Electro Mechanical Systems (MEMS), pp. 271-274, Kobe, Japan, (2007.1)

・K. Naka, H. Hayashi, M. Senda, H. Shiraishi and S. Konishi: “Effect of Nano Stripe Carbonized-Polymer Electrode on High S/N Ratio in Electrochemical Detection”, Micro Electro Mechanical Systems (MEMS), pp. 195-198, Kobe, Japan, (2007.1)

・Y. Watanabe, M. Maeda, N. Yaji, R. Nakamura and S. Konishi: “Small, Soft, and Safe Microactuator for Retinal Pigment Epithelium Transplantation”, Micro Electro Mechanical Systems (MEMS), pp. 659-662, Kobe, Japan (2007.1)

・S. Kusuda, S. Sawano and S. Konishi: “Fluid-Resistive Bending Sensor Having Perfect Compatibility with Flexible Pneumatic Balloon Actuator”, Micro Electro Mechanical Systems (MEMS), pp. 615-618, Kobe, Japan (2007.1)

・T. Horie, S. Sawano and S. Konishi: “Micro Switchable Sucker for Fixable and Mobile Mechanism of Medical MEMS”, Micro Electro Mechanical Systems (MEMS), pp. 691-694, Kobe, Japan (2007.1)

・O. C. Jeong and S. Konishi: “Self-Generated Peristaltic Motion of Cascaded Diaphragm Actuators for Micro Fluidic Systems” Micro Electro Mechanical Systems (MEMS), pp. 135-138, Kobe, Japan, (2007.1)

・O. C. Jeong and S. Konishi: “3 Dimensionally Combined Pyrolyzed Polymer Sensor and Heater toward All Polymeric Gas Detection System”, Micro Electro Mechanical Systems (MEMS), pp. 111-114, Kobe, Japan, (2007.1)


2006

・O. C. Jeong and S. Konishi: “Computational Modeling of Pneumatic Particle Capture Device”, Miniaturized Systems for Chemistry and Life Sciences (μ-TAS), pp. 62-64, Tokyo, Japan, (2006.11)

・W. Tonomura, R. Kitazawa, T. Ueyama, H. Okamura and S. Konishi: “Electrophysiological Biosensor with Micro Channel Array for Sensing of Signals from Single Cells”, Sensors, pp. 140-143, Daegu, Korea, (2006.10)

・S. Konishi, O. C. Jeong and S. Kusuda: “Pneumatic Micro Finger and Hand toward Micro Surgical Tool”, Flexible Automation (ISFA), pp. 311-312, Osaka, Japan, (2006.7)

・R. Yokokawa, K. Yamamoto, S. Aoki, K. Naka and S. Konishi: “Characterization of Patterned Pyrolyzed Polymer for glucose sensor”, Transducers and Micro-Nano Technology (APCOT), Singapore, (2006.6)

・O. C. Jeong,T. Morimoto and S. Konishi: “Pneumatically Driven All PDMS Gas Regulator”, Transducers and Micro-Nano Technology (APCOT), Singapore, (2006.6)

・W. Tonomura, R. Kitazawa, T. Ueyama, H. Okamura and S. Konishi: “Transparent Biosensor for Optical and Electrophysiological Sensing of Luciferin-Luciferase Reaction”, Microtechnologies in Medicine and Biology (MMB), pp. 45-48, Okinawa, Japan, (2006.5)

・O. C. Jeong, T.morimoto, Y.Watanabe and S. Konishi: “Pneumatic Particle Manipulator with Vibrator Matrix”, Micro Electro Mechanical Systems (MEMS), pp. 394-397, Istanbul, Turkey, (2006.1)

・O. C. Jeong and S. Konishi: “Peristaltic PDMS Pump with Perfect Dynamic Valves for both Gas and Liquid”Micro Electro Mechanical Systems (MEMS), pp. 782-785, Istanbul, Turkey, (2006.1)

・K. Naka and S. Konishi: “Local Heating of Pyrolyzed Polymer Heaters for Further Carbonization at Higher Temperature”, Micro Electro Mechanical Systems (MEMS), pp. 278-281, Istanbul, Turkey, (2006.1)

・K. Naka, T. Hashishin, J. Tamaki and S. Konishi: “Pyrolyzed Polymer as Absorbent of Nitrogen Dioxide Sensor”, Micro Electro Mechanical Systems (MEMS), pp. 518-521, Istanbul, Turkey, (2006.1)

・R. Yokokawa, T. Saika, T. Nakayama, H. Fujita and S. Konishi: “Picoliter Controllable Syringes Driven by Parallel Motions of Electrostatic Controlled Linear Inchworm Actuator”, Micro Electro Mechanical Systems (MEMS), pp. 798-781, Istanbul, Turkey, (2006.1).


2005

・O. C. Jeong and S. Konishi:“Fabrication of all PDMS micro pump”, Proc. of International Symposium on Micro-Nano Mechatronics and Human Science, pp. 139-143, Nagoya, Japan (2005.11)

・O. C. Jeong, S. Kusuda, T. Sakakibara, S.Konishi and M. Nokata:“Pneumatic Micro Finger as Endeffecter of Robot”, Proc. of International Symposium on Micro-Nano Mechatronics and Human Science, pp. 145-148, Nagoya, Japan (2005.11)

・K. Naka and S. Konishi:“Design and Fabrication of Pyrolyzed Polymer Micro and Nano Structures”, Proc. of International Symposium on Micro-Nano Mechatronics and Human Science, pp. 103-108, Nagoya, Japan (2005.11)

・S. Konishi, H. Nagae, T. Sagawa, K. Naka and K. Yoshioka:“Semiconductivity of Pyrolyzed Polymer for MEMS Application”, Proc. of 13th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), pp. 271-274, Seoul, Korea (2005.6)

・S. Konishi, A. Oshima, N. Kinoshita, I. Kumagaya and T. Kishi:“Batch-Fabricated High Dense Multi Sliders for WDM Spectral Attenuation”, Actuators and Microsystems (Transducers), pp. 1242-1245, Seoul, Korea (2005.6)

・J. Tamaki, J. Niimi, S. Ogawa and S. Konishi:“Effect of Micro-gap on Sensing Properties to Dilute Chlorine Gas of Indium Oxide Thin Film Microsensors”, Actuators and Microsystems (Transducers), pp. 1931-1934, Seoul, Korea (2005.6)

・O. C. Jeong, S. Kusuda and S. Konishi:“All PDMS Pneumatic Balloon Actuators for Bidirectional Motion of Micro Finger”, Micro Electro Mechanical Systems (MEMS), pp. 407-410, Miami, Florida, USA (2005.1)

・M. Tanaka, T. Sakashita and S. Konishi:“Acoustic Differential Amplifier Based on Acoustic FET”, Micro Electro Mechanical Systems (MEMS), pp. 44-47, Miami, Florida, USA (2005.1)


2004
.
・S. Miyaji, S. Ogura, S. Konishi and J. Tamaki: “Effect of Micro-Gap Electrode in Nitrogen Dioxide Sensor Using Tungsten Oxide Thin Film”, Joint International Meeting, Honolulu, USA (2004.10)

・J. Tamaki, A. Miyaji, J. Makinodan, S. Ogura and S. Konishi: “Effect of Micro-gap Electrode on Detection of Dilute Nitrogen Dioxide Using Tungsten Oxide Thin Film Sensors”, Chemical Sensors, pp. 140-141, Tsukuba, Japan (2004.7)

・A. Oshima, H. Uezawa, S. Konishi, T. Sano and M. Katayama: “Electrostatic Controlled Linear Inchworm Actuator for Optical Dynamic Gain Equalizer”, Transducers and Micro-Nano Technology (APCOT), pp. 902-906, Sapporo, Japan (2004.6)

・S. Konishi, M. Liger, T.A. Harder and Y-C. Tai: “Parylene-Pyrolyzed Carbon for MEMS Applications”, Micro Electro Mechanical Systems (MEMS), pp. 161-164, Maastricht, The Netherlands (2004.1)

・M. Liger, S. Konishi and Y-C. Tai: “Uncooled All-Parylene Bolometer”, Micro Electro Mechanical Systems (MEMS), pp.593-596, Maastricht, The Netherlands (2004.1).


2003

・M. Tanabe, J. Makinodan, K. Suzuki, Y. Hosokawa, S. Konishi, N. Ozaki and H. Oka: “Development of Micro Channel Array with Detecting Electrodes for Electrophysiological Biomedical Sensor”, Micro Electro Mechanical Systems (MEMS), pp. 407-410, Kyoto, Japan (2003.1)

・M. Munechika, H. Uezawa, A. Oshima, S. Konishi, T. Sano and M. Katayama: “Optical Dynamic Gain Equalizer Using Parallel Motion Type Of ECLIA”, Micro Electro Mechanical Systems (MEMS), pp. 243-246, Kyoto, Japan (2003.1)

・M. Terada, M. Tanaka and S. Konishi: “MEMS Based Acoustic FET as Active Components for Integrated Functional Acoustic Systems”, Micro Electro Mechanical Systems (MEMS), pp. 181-184, Kyoto, Japan (2003.1)


2002

・S. Konishi, K. Yoshifuji, M. Munechika and G. Kawaguchi: “Vertical Motion Microactuator Based on the Concept of ECLIA (Electrostatic Controlled Linear Inchiworm Actuator)”, Micro Electro Mechanical Systems (MEMS), pp. 602-605, Las Vegas, Nevada, USA (2002.1)

・S. Konishi, M. Yanada, I. Minami, Y. Kimura and S. Ikeda: “Application of Direct Selective Metal Plating”, Micro Electro Mechanical Systems (MEMS), pp. 396-399，Las Vegas, Nevada, USA (2002.1)


2001

・Y. Hamuro, M, Yoda and S. Konishi: “Acoustic Impedance Control System Using a Compact Impact Drive Actuator”, Micro Mechatronics and Human Science, pp. 99-104 (2001.9)

・S. Konishi, T. Kobayashi, H. Maeda, S. Asajima and M. Makikawa: “Cuff Actuator for Adaptive Holding Condition around Nerves”, Solid-State Sensors and Actuators (Transducers & Eurosensors), pp. 382-385, Munich, Germany (2001.6)

・S. Konishi, K. Ohno and M. Munechika: “Parallel Linear Actuator System with High Accuracy and Large Stroke”, Solid-State Sensors and Actuators (Transducers & Eurosensors), pp. 682-685, Munich, Germany (2001.6)

・M. Yoda and S. Konishi: “Acoustic Impedance Control through Structural Tuning by Pneumatic Balloon Actuators”, Micro Electro Mechanical Systems (MEMS), pp. 244-247, Interlaken, Switzerland (2001.1)


2000

・S. Hirai, H. Tanigawa, P. Cusin, T. Masui, S. Konishi and S. Kawamura : “Qualitative Synthesis of Deformable Cylindrical Actuators through Constraint Topology”, Intelligent Robots and Systems, Vol.1, pp. 197-202, Takamatsu, Japan (2000.10)

・P. Cusin, T. Sawai and S. Konishi : “Large Travel Range, High Accuracy Inchworm-Type Stepper Positioner”，Eurosensors, pp. 177-178, Copenhagen, Denmark (2000.8)

・M. Yoda and S. Konishi: “Tunable Acoustic Absorbing System for Semi-Active Noise Control”, 6th Aeroacoustics Conference and Exhibit, Lahaina,USA (2000.6)

・O. Tabata, S. Konishi, P. Cusin, Y. Ito, F. Kawai, S. Hirai and S. Kawamura: “Microfabricated Tunable Bending Stiffness Device”, Micro Electro Mechanical Systems (MEMS), pp. 23-27, Miyazaki, Japan (2000.1)

・F. Kawai, P. Cusin and S. Konishi：”Thin Flexible End-Effector Using Pneumatic Balloon Actuator”, Micro Electro Mechanical Systems (MEMS), pp. 391-396, Miyazaki, Japan (2000.1)


1999

・N. Nishi, T. Kato, H. Ueno, S. Konishi and S. Sugiyama:“3-Dimensional Micromachining of PTFE Using Synchrotron Radiation Direct Photo-Etching”, Micro Mechatronics and Human Science (MHS), pp. 93-96 , Nagoya, Japan (1999.11)

・S. Konishi, Y. Mizoguchi and K. Ohno:“Development of a Non-Contact Conveyance System Composed of Distributed Nozzle Units”, Emerging Technologies and Factory Automation (ETFA), pp. 593-598, Piscataway, New Jersey, USA (1999.10)

・S. Konishi, M. Yoda and Y. Hikida:“Optimization of Characteristics of an Acoustic Absorber Using an Array of High Aspect Ratio Micro Hole”, Solid-State Sensors and Actuators (Transducers), pp. 1394-1397, Sendai, Japan (1999.6)

・S. Konishi，H. Maeda，T. Ezaki，M. Kawato，S. Asajima and M. Makikawa:“A Selective Stimulation of Nerve Bundles Using a Flexible Multielectrode”, Solid-State Sensors and Actuators (Transducers), pp.276-279 (1999.6)

・S. Konishi, K. Honsho and S. Sugiyama:“Direct Drawing for Microfabrication without Photolithography”, Micro Electro Mechanical Systems (MEMS), pp. 194-199，Orland, Florida, USA (1999.1)


1998

・M. Yoda, S. Konishi, M. Hosaka, S. Sugiyama and S. Akishita: “Tunable Acoustic Absorber with Micro Deep Hole Array”, Micro Mechatronics and Human Science, pp. 177-182 (1998.11).

・S. Konishi, Y. Mizoguchi, M. Harada and K. Ohno: “Experimental Investigation of Distributed Conveyance System Using Air Flow”, Micro Mechatronics and Human Science, pp. 195-200 (1998.11)

・S. Konishi, M. Yoda, N. Hosaka, S. Sugiyama and S. Akishita: “Tunable Acoustic Absorbing System Using a Deep Hole Array”, Micro Electro Mechanical Systems (MEMS), pp. 655-660 (1998.1).


1997

・H. Ueno, M. Hosaka, Y. Zhang, O. Tabata, S. Konishi and S. Sugiyama: “Study on Fabrication of High Aspect Ratio Microparts Using the LIGA Process”, Micro Mechatronics and Human Science, pp. 49-54 (1997.10).

・S. Konishi, M. Harada, Y. Ogami and Y. Daiho: “Measurements and Analysis on Characteristics of a Conveyance System using Air Levitation”, Emerging Technologies and Factory Automation, pp. 232-236 (1997.9).

・Y. Mita, S. Konishi and H. Fujita: “Two Dimensional Micro Conveyance System with Through Holes for Electrical and Fluidic Interconnection”, Solid-State Sensors and Actuators (Transducers), pp. 37-40 (1997.6).